|
Components of the Detector
- Fiber Loom Assembly
- Structural Frame
- 6LiF:ZnS/Ag Scintillator
- 460 Double-Clad 1 mm Diameter Wavelength-Shifting
Fibers
- 405 nm --» 520 nm
- 2 layer orthogonal grid: 152 horizontal and 308
vertical fibers mounted on the loom with 2.5mm grid spacing
- Boron-Aluminum Electronics Shielding Plate(s)
- 0.2 mm thick Reflective Back Plate
- Light Tight Covers for Frame and Loom Assembly
- 32 Green Enhanced 1" diameter Photomultiplier Tube
Assemblies
- Electronics to Power Photomultiplier Tubes and
Process Event Signals
Detector Performance
Properties
| Detection Efficiency: |
75% capture
efficiency for thermal neutrons |
| Time
Resolution: |
5 µsec |
Maximum
Count Rate:
|
10^5 n/s |
| Position
Resolution: |
0.5 x 2.0 cm
(Adjustable) |
| Gamma Discrimination: |
1.8 x 10-6 |
Power Consumption:
|
16 W |
Overall Dimensions of
the Detector
| Detector Area: |
0.3 m2 |
| Width: |
40.23 cm |
| Length: |
78.48 cm |
| Height: |
65.69 cm |
Dimensions of the Fiber Loom
| Width: |
39.88 cm |
| Length: |
77.72 cm |
| Height: |
11.30 cm |
|
Scintillator Neutron
Detector Customization
The
Scintillator Neutron Detector can be customized to fit your specific
laboratory applications. The specifications listed were developed
for
the Powgen3 engineering powder diffractometer
facility at the Spallation Neutron Source in Oak Ridge,
Tennessee.
Contact PartTec, Ltd. to speak with a senior scientist about specific
customization options for your application and laboratory needs.

Large
Wavelength-Shifting Detector Arrays
Individual
wavelength-shifting fiber detector modules
may be arranged in vertical and/or
horizontal arrays covering areas of 10's of square meters. The
detector electronics modules can be multiplexed to produce a contiguous
large area orthogonal grid of high sensitivity neutron detection with
adjustable pixel resolution. Arrays are being built for
instruments like the POWGEN Powder Diffractometer instrument at the
Spallation Neutron Source.
|